Possible to program remotes (Peugeot 407 2007) using Lonsdor?
Yep! it’s tested. Lonsdor K518ise is able to read pin codes and program new keys and remotes to 407.
The test: (done by engineers working for cardiagtool.co.uk)
step 1: read pin
step 2: add new keys
step 3: program remotes
Step 1: Read Pin Code
Select Peugeot->Read Pin Code->Type 2
During the function operation, the windshield wiper brushes and the headlight illuminates which is normal
To stop wiper brush, check Help and pull out the corresponding fuse.
Turn ignition switch to ON position
Lonsdor is gonnna to read vehicle information
Reading data and verifying pin
Read pin code success
Step 2: Program a new key
Select Peugeot->Select from vehicle->407->Immobilizer->Program key
Turn on ignition
require to enter pin to access
Turn ignition off and then turn on within 15 seconds
Press YES to program next key or Cancel to quit.
Step 3: Program the remote control
Step to reprogram remote control:
1.Switch ignition off and remove key
2. Insert a key and switch ignition on
3. Press any button of the remote key for 10 seconds and release within 20 seconds.
4. Switch ignition off and remove key
5. For more keys, repeat step 2-4